This red LED stop/turn/tail/back-up light from Uriah Products comes ready for installation with a rubber grommet and a standard three-prong plug design. It’s sealed to keep out water, making it acceptable for use on boat trailers, and the contact sockets are filled with silicone to prevent corrosion. It fits standard trailer light mounts, and the LED has seven diodes to throw off more than enough light.
This adapter from Uriah Products allows you to convert your vehicle’s 7-way RV connector into a 6-way connector. It’s quick and easy to install, simply plug it into your existing connector and you’re good to go! It features high-impact plastic construction that resists corrosion, even after years of use.
This stop/turn/tail light from Uriah Products is designed for vehicles without a license plate illuminator. It’s a stud-mounted light that includes the necessary hardware for installation, and it uses an incandescent bulb that’s housed in a red lens that snaps on and off for easy bulb replacement.
This magnetic towing light kit from Uriah Products installs quickly and allows your trailer to meet DOT specifications. This kit comes with two stop/turn/tail lights that are attached strong, scratch-resistant magnets for safe attachment, a 4-way flat harness adapter, 20’ of wire, and a 5’ span between the lights, allowing them to fit almost any vehicle. The lights have red rear-facing lenses and amber front-facing lenses.
This Uriah Products 4-pole flat trailer wire connector works with vehicles that have 2-wire lighting systems. It has a flat extension loop with a ground terminal on the trailer end. It’s 36” long, and it has a rubber-molded connector and bonded wires to provide maximum durability. It easily installs, simply hardwire it to the existing wiring.
This amber LED marker and clearance light from Uriah Products comes sealed for superb durability. It’s 4-1/16” long and 1-1/16” wide, and it comes ready to be hardwired with a two-wire design and mounting holes that make for easy installation.
This Uriah Products LED identification light bar is sealed well enough to hold up to marine use and whatever conditions the weather can throw at it. This one comes with red lenses, and it comes with a stainless steel mounting bracket that’s ready to be mounted onto the surface of your trailer.
This 6-way round to 4-way flat adapter from Uriah Products lets you easily change the type of connection in your trailer’s electrical circuit. It’s constructed out of durable molded plastic, meaning that while it might not be as heavy duty as metal connectors it also won’t corrode from exposure to weather.
This LED stop/turn/tail light from Uriah Products uses a bright 12-diode LED to throw of a ton of light for good visibility. It makes for a good upgrade from an incandescent light or a replacement for a damaged OEM LED. This model is designed for the left side of trailers under 80” wide, and it has a 4-1/2” diameter.
This chrome license light from Uriah Products has a screw-on design with 2” in between holes that makes it easy to install. The chrome finish adds durability, and this light is also suitable for use as an interior utility light inside RVs and trailers.
This three-pronged plug from Uriah Products will help you connect a trailer light to an existing circuit. It’s designed for 12-volt circuits, and it’s useful when on/off and separate brake light circuits are needed.
This Uriah Products adapter converts your vehicle’s round 7-way RV connector into a round 6-way adapter with a center pin brake. There’s no installation required other than simply plugging the adapter in to your existing connection. It’s constructed out of impact-resistant plastic to provide years of corrosion resistance.
This submersible lighting kit from Uriah Products contains everything you need to quickly install a rear lighting system that meets DOT standards trailers that are under 80” wide. The lights are sealed to be waterproof and fully submersible, making them a great fit for boat trailers, but they can be used on other trailers, too. The kit includes two bright LED stop/turn/tail lights that mount with strong, scratch-resistant magnets, a flat 4-way harness adapter, a license bracket, and 20’ of wire.
This Uriah Products extension loop extends your current 4-way connector by 12”. It includes an integrated ground, and it features corrosion-resistant terminals that ensure durability.
This Uriah Products marker and clearance light is sealed to ensure maximum durability. It measures 2-1/2” wide and 1-1/4” high. It accommodates a 2-prong plug and is compatible with Uriah chrome housings UL151100 and 101 lights. It comes with all the hardware required for installation, and it includes a bracket that also acts as a ground.
This 7-pole plastic trailer connector from Uriah Products is designed for the vehicle end of 12-volt DC circuits. It allows you to hook up trailers with 7-pin RV style connectors, and it works great whether you’re building a system from scratch or simply replacing a worn-out connector. It’s made out of impact resistant plastic so that it won’t corrode, even after years of use.
This low-profile boat trailer light kit from Uriah Products comes with all of the necessary hardware to get your trailer lighting up to DOT standards. It includes two stop/turn/tail lights, a 25’ 4-flat trailer wire, a license plate bracket, and all of the hardware required for installation. The lights use LEDs housed in red lenses that are sealed to be waterproof and fully submersible.
This light bar from Uriah Products includes a durable white bracket and three single-bulb LED ID lights. It installs easily, and the lights meet or exceed all applicable SAE and DOT standards. They’re each 3-1/4” wide and 1” tall.
This Uriah Products replacement lens for stop/tail/turn lights is designed to fit all standard 4-1/2” tail lights, including Uriah’s UL440001 and UL440011 models. It has a screw-on design, so installation only takes a minute!
This red round replacement lens from Uriah Products has a universal design and should fit all 4” snap-on lenses, including Uriah’s UL555000 towing lights.
This two-pole flat trailer wire connector from Uriah Products is a durable, 12” flat extension loop. You can use it with 12-volt accessories, and if you want you can cut the cord to create two compatible plugs. It features 16-gauge copper wire construction and tin-plated corrosion-resistant corrosion.
This Uriah Products adapter converts the 7-way RV-style connector on your vehicle into a flat 4-way connector. It installs easily, just plug the adapter into the existing connector and you’re good to go! It’s made out of durable plastic so that it won’t corrode, even after years of use.